Använd läsaren nedan för att läsa Smeg DWAU6314X2 diskmaskin bruksanvisningen. Du kan bläddra genom bruksanvisningen direkt på sidan och använda vår läsares funktioner för att hitta all viktig information om installation, användning och underhåll av denna Smeg diskmaskin.
Bruksanvisning
HelskärmFelkoder
Nedan hittar du felkoderna för Smeg DWAU6314X2.
Acquastop failure - The anti-flooding system has been activated
Contact the after-sales service
Wash motor pump does not work
Contact your authorised Service Centre
Safety level - The system which limits the water level inside the dishwasher has been tripped
Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service
Water heating malfunction - The water is not heated or the heating parameters are not correct
Repeat the washing program; if the problem persists, contact the after-sales service
Water temperature monitoring malfunction
Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service
Water intake malfunction - The appliance does not take in water or does not do so correctly
Check that the water connections are correct, the water intake tap is turned on and the filter is not fouled. If the problem persists, contact the after-sales service
Water pump-out malfunction - The appliance does not pump out the water or does not do so correctly
Check that the drain hose is not kinked or crushed and that the siphon and filter are not fouled. If the problem persists, contact the after-sales service
Turbine flow-regulator malfunction - The appliance is not able to measure the amount of water loaded accurately
Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service
Alternate washing system malfunction
Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service
Water intake system malfunction
Contact the after-sales service
Felsökning
Praktiska tips för att lösa de vanligaste problemen med Smeg DWAU6314X2.
Orsak: Various system malfunctions detected by the dishwasher
Open and close the door, or turn off and on the machine. At this point is possible to program the dishwasher again. If the malfunction persists, contact your authorised Service Centre
Hjälp
Har du frågor om diskmaskin DWAU6314X2 från Smeg? Ställ dem direkt till vår expert! Du får information, praktiska tips och skräddarsydda lösningar på bara några sekunder.
Relaterade bruksanvisningar
Nedan hittar du bruksanvisningar för diskmaskin som liknar DWAU6314X2. Prova även att se alla Smeg diskmaskin bruksanvisningar
Diskussion
Lämna en kommentar eller ställ en fråga
Delta i diskussionen
Ställ en fråga om bruksanvisningen eller lägg till ett användbart svar för andra användare.