Smeg LSP433PXIN diskmaskin Bruksanvisning

The appliance cannot take in water

Contact technical customer service

The appliance cannot drain water from the tank

Contact technical customer service

The dishwasher cannot measure the precise water quantity that has been loaded

Alarm E7 is displayed after the program which will be completed as dishwasher function is not compromised. Contact technical customer service if error persists

Problem on the water distribution system to the baskets

Contact technical customer service

Water intake system malfunction

Contact technical customer service

Orsak: Condensation

This is normal; the appliance is not defective

Orsak: Plastic internal parts fade over time

This is normal and does not affect dishwasher function

Orsak: Salt or rinse aid is missing

Add salt and/or rinse aid

Orsak: Detergent dispenser lid blocked by dishes; tablet not dissolved properly; detergent stored opened in humid environment; dishes loaded incorrectly

Ensure dishes do not protrude from baskets; place tablets instead of standing them up; use powder detergent or stronger program; replace old detergent; load dishes correctly

Orsak: Cutlery is not stainless steel; cutlery washed with oxidizing items

Use only stainless steel cutlery; do not wash items that can oxidize together

Orsak: Water softener tank lid not tightly closed

Tighten the water softener tank lid properly

Orsak: Lock lug placement incorrect; lock hook not properly engaged; objects blocking door closure

Check and adjust lock lug with plastic screw if needed; check lock hook is engaged; remove objects blocking door

Orsak: Electrical power issue; power cord issue

Check electrical supply; check power cord

Orsak: Normal operation - spray arms start rotating approximately 5 minutes after start

This is normal program behavior

Orsak: Water tap is closed

Open the water tap

Orsak: Rinse aid finished; program does not include final drying; water in cavities; dishes removed too quickly; eco rinse aid less effective; plastic kitchenware; combined detergent not effective

Add rinse aid; select program with drying; check dish position during loading; wait at least 20 minutes after program ends; use traditional rinse aid; use powder detergent or stronger program; switch combined detergent product

Orsak: Glasses not suitable for dishwasher; incorrect water softener setting

Use only dishwasher-safe glassware; reduce water softener setting; use detergent with glass protection additives

Orsak: Water droplets form on plastic parts during drying; insufficient rinse aid

Tilt dishes for water drainage; use stronger program; use traditional rinse aid or increase dosage; increase water softener setting

Orsak: Too much rinse aid; insufficient rinse aid or low setting; ineffective detergent

Reduce rinse aid dosage; add rinse aid or increase dosage; do not store detergent packages open for long periods

Orsak: Dishes loaded too tightly; spray arms blocked; spray arm holes clogged; dirty filters; filters incorrectly installed; wrong program selected; combined detergent with short programs; insufficient detergent

Leave adequate space between dishes; do not block spray arm rotation during loading; clean spray arms; clean filters; check and correct filter installation; select appropriate program; use powder detergent or stronger program; increase detergent dosage

Orsak: Upper basket not adjusted correctly

Adjust upper basket with right and left sides at same level

Orsak: Deposits from detergent ingredients; incorrect water hardness setting; ineffective combined or eco detergent; salt container lid not locked

Use machine dishwashing detergent; manually clean appliance; switch detergent; adjust water softener setting; tighten salt container lid; adjust water hardness system; use separate products