Använd läsaren nedan för att läsa Smeg ST2FABNE diskmaskin bruksanvisningen. Du kan bläddra genom bruksanvisningen direkt på sidan och använda vår läsares funktioner för att hitta all viktig information om installation, användning och underhåll av denna Smeg diskmaskin.

Bruksanvisning

Helskärm
Helskärm
Dela denna bruksanvisning Smeg
Var denna bruksanvisning användbar?

Felkoder

Nedan hittar du felkoderna för Smeg ST2FABNE.

E1 water
KRITISK

Acquastop failure - The anti-flooding system has been activated

Lösning

Contact the after-sales service

E2 water
KRITISK

Safety level - The system which limits the water level inside the dishwasher has been tripped

Lösning

Interrupt the program and switch off the dishwasher. Switch back on, program again and start the washing cycle. If the problem persists, contact the after-sales service

E3 temperature
KRITISK

Water heating malfunction - The water is not heated or the heating parameters are not correct

Lösning

Repeat the washing program; if the problem persists, contact the after-sales service

E4 temperature
KRITISK

Water temperature monitoring malfunction

Lösning

Interrupt the program and switch off the dishwasher. Switch back on, program again and start the washing cycle. If the problem persists, contact the after-sales service

E5 water
VARNING

Water intake malfunction - The appliance does not take in water or does not do so correctly

Lösning

Check that the water connections are correct, the water intake tap is turned on and the filter is not fouled. If the problem persists, contact the after-sales service

E6 drain
VARNING

Water pump-out malfunction - The appliance does not pump out the water or does not do so correctly

Lösning

Check that the drain hose is not kinked or crushed and that the siphon and filter are not fouled. If the problem persists, contact the after-sales service

E7 water
INFORMATION

Turbine flow-regulator malfunction - The appliance is not able to measure the amount of water loaded accurately

Lösning

Interrupt the program and switch off the dishwasher. Switch back on, program again and start the washing cycle. If the problem persists, contact the after-sales service

E8 other
KRITISK

Alternate washing system malfunction

Lösning

Interrupt the program and switch off the dishwasher. Switch back on, program again and start the washing cycle. If the problem persists, contact the after-sales service

E9 water
KRITISK

Water intake system malfunction

Lösning

Contact the after-sales service

Felsökning

Praktiska tips för att lösa de vanligaste problemen med Smeg ST2FABNE.

Program fails to start power

Orsak: Dishwasher not connected to power, power failure, water tap closed, or door not properly closed

Lösning

Check that the dishwasher is connected to the electrical power supply, there is no power failure, the water tap is open, and the dishwasher door is properly closed

Water remains inside the dishwasher water

Orsak: Drain hose kinked, drain siphon obstructed, or filters clogged

Lösning

Check that the drain hose is not kinked, the drain siphon is not obstructed, and the dishwasher filters are not clogged

Dishes are not being cleaned properly maintenance

Orsak: Insufficient detergent, lack of regenerating salt, incorrect loading, unsuitable program, dirty filters, obstructed spray arm nozzles, or objects blocking spray arm rotation

Lösning

Check correct detergent amount, ensure regenerating salt is present, load dishes correctly, select suitable program, clean and position filters correctly, ensure spray arm nozzles are not obstructed, and remove any objects blocking spray arms

Dishes fail to dry or remain dull quality

Orsak: Lack of rinse aid, incorrect rinse aid dispenser setting, or poor quality detergent

Lösning

Check that rinse aid is present, the dispenser setting is correct, and use good quality detergent that has not lost its effectiveness

Dishes show streaking or staining quality

Orsak: Rinse aid dispenser setting too high

Lösning

Check that the rinse aid dispenser setting is not too high

Visible traces of rust inside the tank maintenance

Orsak: Rust fragments from water pipes or external elements on cookware, incorrect detergent amount, or incorrect water softening setting

Lösning

Check that the amount of detergent is correct, the salt container cap is securely closed, and the water softening setting is correct. Use commercial products to remove rust marks if necessary

Before starting after prolonged disuse installation

Orsak: Deposits of sludge or rust in water pipes

Lösning

Allow water to run from the water supply tap for a few minutes before using the dishwasher

Vanliga Frågor

De vanligaste frågorna om Smeg ST2FABNE.

För att återställa ett larm måste du öppna och stänga dörren eller slå av och på maskinen. Därefter kan du programmera diskmaskinen igen. Om funktionsfelet kvarstår, kontakta din auktoriserade servicecenter.

Diskmaskinen kan indikera en serie funktionsfel genom att flera lampor lyser samtidigt. Ett 'E' eller 'Err' visas också på displayen när ett fel uppstår. Se felöversikten i bruksanvisningen för en beskrivning av varje felkod.

Kontrollera att rätt mängd diskmedel tillsätts, att regenererande salt finns i behållaren, att disk är inladdad korrekt, att rätt program är valt, att alla filter är rena och rätt placerade, att sprakarmarnas munstycken inte är täckta, och att inget föremål hindrar sprakarmarnas rotation.

Vattentillförselns minimiövertryck är 0,05 MPa och max 0,9 MPa (0,5-9 bar). Dessa krav är viktiga för att diskmaskinen ska fungera korrekt och ta in rätt mängd vatten.

Kontrollera att avtappningsslangen inte är vickad eller klämd, att avtappningssifonen inte är igensatt, och att diskmaskininfilter inte är igenstoppade. Om problemet kvarstår, kontakta servicecenter.

Se till att rätt mängd diskmedel används, att salt behållarens lock är säkert stängt, och att vattenuppmjukarens inställning är korrekt. Vissa diskmedel kan vara mer korrosiva än andra.

E1 betyder Acquastop-fel - det vill säga att systemet mot översvämning har aktiverats. Systemet löses ut vid vattenlläckor. Kontakta servicecenter omedelbar.

Larmkoderna E1, E2, E3, E4, E8 och E9 avbryter programmet omedelbar. E5 och E6 avbryter det aktuella programmet, men återupptar det när problemet är löst. E7 visas vid slutet av cykeln men programmet fortsätter eftersom diskmaskinens funktion inte påverkas.

Hjälp

Har du frågor om diskmaskin ST2FABNE från Smeg? Ställ dem direkt till vår expert! Du får information, praktiska tips och skräddarsydda lösningar på bara några sekunder.

Nedan hittar du bruksanvisningar för diskmaskin som liknar ST2FABNE. Prova även att se alla Smeg diskmaskin bruksanvisningar

Diskussion

Lämna en kommentar eller ställ en fråga

Delta i diskussionen

Ställ en fråga om bruksanvisningen eller lägg till ett användbart svar för andra användare.

Ange ditt meddelande här
Ange ditt namn
Ange din e-postadress