Använd läsaren nedan för att läsa Smeg ST313 diskmaskin bruksanvisningen. Du kan bläddra genom bruksanvisningen direkt på sidan och använda vår läsares funktioner för att hitta all viktig information om installation, användning och underhåll av denna Smeg diskmaskin.
Bruksanvisning
HelskärmFelkoder
Nedan hittar du felkoderna för Smeg ST313.
Acquastop failure - Anti-flooding system has been activated
Contact the after-sales service
Safety level - Water level limiting system has been tripped
Interrupt the program and switch off the dishwasher. Switch back on, reprogram and restart. If problem persists, contact after-sales service
Water heating malfunction - Water is not heated or heating parameters are incorrect
Repeat the washing program. If problem persists, contact after-sales service
Water temperature monitoring malfunction
Interrupt the program and switch off the dishwasher. Switch back on, reprogram and restart. If problem persists, contact after-sales service
Water intake malfunction - Appliance does not take in water or does so incorrectly
Check water connections, ensure water intake tap is on and filter is not fouled. If problem persists, contact after-sales service
Water pump-out malfunction - Appliance does not pump out water or does so incorrectly
Check that drain hose is not kinked or crushed and that siphon and filter are not fouled. If problem persists, contact after-sales service
Turbine flow-regulator malfunction - Appliance cannot accurately measure the amount of water loaded
Interrupt the program and switch off the dishwasher. Switch back on, reprogram and restart. If problem persists, contact after-sales service
Alternate washing system malfunction
Interrupt the program and switch off the dishwasher. Switch back on, reprogram and restart. If problem persists, contact after-sales service
Water intake system malfunction
Contact the after-sales service
Felsökning
Praktiska tips för att lösa de vanligaste problemen med Smeg ST313.
Orsak: Dishwasher not connected to power, power failure, water tap closed, or door not properly closed
Check electrical connection, verify no power failure, open water tap, ensure door is properly closed
Orsak: Drain hose kinked, drain siphon obstructed, or dishwasher filters clogged
Check drain hose for kinks, clear siphon obstruction, clean filters
Orsak: Insufficient detergent, no regenerating salt, incorrect loading, unsuitable program, dirty filters, obstructed spray arm nozzles, or spray arm rotation obstructed
Add correct amount of detergent, fill salt container, reload dishes correctly, select appropriate program, clean and position filters correctly, clear spray arm nozzles
Orsak: No rinse aid, incorrect rinse aid dispenser setting, or low quality detergent
Fill rinse aid container, adjust dispenser setting, use quality detergent stored correctly
Orsak: Rinse aid dispenser setting too high
Reduce rinse aid dispenser setting
Orsak: External rust fragments from water pipes or cookware, incorrect detergent amount, or incorrect water softening setting
Use commercial rust removal products, verify correct detergent amount, ensure salt container is sealed and water softening setting is correct
Orsak: Sludge or rust deposits in water pipes
Allow water to run from supply tap for several minutes before reconnecting water intake hose
Vanliga Frågor
De vanligaste frågorna om Smeg ST313.
Hjälp
Har du frågor om diskmaskin ST313 från Smeg? Ställ dem direkt till vår expert! Du får information, praktiska tips och skräddarsydda lösningar på bara några sekunder.
Relaterade bruksanvisningar
Nedan hittar du bruksanvisningar för diskmaskin som liknar ST313. Prova även att se alla Smeg diskmaskin bruksanvisningar
Diskussion
Lämna en kommentar eller ställ en fråga
Delta i diskussionen
Ställ en fråga om bruksanvisningen eller lägg till ett användbart svar för andra användare.