Använd läsaren nedan för att läsa Beko BDFN26531W köksmaskin bruksanvisningen. Du kan bläddra genom bruksanvisningen direkt på sidan och använda vår läsares funktioner för att hitta all viktig information om installation, användning och underhåll av denna Beko köksmaskin.
Bruksanvisning
HelskärmFelkoder
Nedan hittar du felkoderna för Beko BDFN26531W.
Chassis water filling fault
1-Cut off the electricity. 2-Close the valve. 3-Get in touch with the authorized service.
Water outage error / Filter is blocked
1-Cut off the electricity connection. 2-Cut off the water connection. 3-Remove water inlet hose. 4-Check and clean the filter. 5-Establish the water connection. 6-Establish the electricity connection. If the error continues, close your dishwasher and get in touch with the authorized service.
Temperature sensor in the dishwasher is faulty
If you see this error continuously and washing performance has reduced, close your dishwasher and get in touch with the authorized service.
Flowmeter is faulty
If you see the error continuously, cut off the electricity, close the valve, and get in touch with the authorized service.
Felsökning
Praktiska tips för att lösa de vanligaste problemen med Beko BDFN26531W.
Orsak: The power plug may not be plugged in. The On/Off button may not have been pressed.
Check if the power plug is plugged in. Make sure you turned on the machine by pressing the On/Off button.
Orsak: The fuse may have blown. The machine's door may be open. Water may not be coming out.
Check the fuses in your home. Make sure you close the machine's door. Make sure the water inlet tap is open.
Orsak: The dishes are placed irregularly. The appropriate program has not been selected. The dishes are very dirty.
Place the dishes as specified in the user manual. Select a program that washes at a higher temperature and for a longer time. Remove the coarse dirt from your dishes with a napkin.
Orsak: The propellers are stuck. The impeller holes are clogged. The filters are clogged.
Before starting the program, turn the upper and lower propellers by hand to make sure they are turning freely. Clean the impellers and filters regularly.
Orsak: Filters are not installed correctly. Baskets are overloaded. The detergent has been stored under inappropriate conditions.
Check the filter system and make sure it is installed correctly. Do not load baskets beyond their capacity. Store detergent in a lidded storage container, away from damp areas.
Orsak: Not enough detergent has been added. Rinse aid is insufficient.
Add the appropriate amount of detergent according to the soiling level of your dishes. Check the rinse aid warning indicator and add rinse aid if necessary, or increase the rinse aid setting.
Orsak: The detergent compartment cover is not closed. Tablet detergent has been used but the tablet button has not been pressed.
After filling the detergent compartment, be sure to close the detergent compartment cover. If your machine has a tablet detergent function, activate it.
Orsak: The surface quality of kitchenware is damaged.
Kitchenware with damaged surfaces cannot achieve the expected cleaning performance. It is not recommended to wash such kitchenware in the dishwasher.
Orsak: The dishes are placed irregularly. Rinse aid is insufficient.
Place your dishes in a way that prevents water from accumulating in them during washing. Check the rinse aid warning indicator and add rinse aid if necessary, or increase the rinse aid setting.
Orsak: The machine was emptied immediately after the wash cycle was completed. A suitable program has not been selected.
Do not unload your machine immediately after the cycle is complete. Leave the door ajar to allow the steam inside to escape for a while. Drying performance is low in short-term programs; select longer programs for higher drying performance.
Orsak: A new washing machine has a distinctive odor. The filters are clogged. The rinse aid reservoir contains chemicals.
The distinctive odor will disappear after a few washes. Clean the filter system regularly. Do not use chemicals such as vinegar, hand washing detergent, or descaler.
Orsak: Dirty dishes have been left in the dishwasher for 2-3 days.
If you're not going to start the dishwasher immediately after loading the dishes, remove any dirt from the dishes and run a pre-wash cycle without detergent every other day. Do not fully close the dishwasher door to prevent odors. You can also use commercially available deodorizers and machine cleaners.
Orsak: Rinse aid is insufficient. The water hardness setting is low or the salt level is insufficient. There is a salt leak.
Check the rinse aid warning indicator and add rinse aid if necessary, or increase the rinse aid setting. Check the water hardness setting by measuring the hardness of the mains water accurately. When filling with salt, be careful not to spill any salt and ensure the salt container lid is closed.
Orsak: The appropriate program has not been selected. The surface quality of kitchenware is damaged. The detergent has been stored under inappropriate conditions.
Select a program that washes at a higher temperature and for a longer time. Tea, coffee, and other dye stains cannot be washed from damaged surfaces. Store detergent in a lidded storage container, away from damp areas.
Orsak: There is a salt leak. Salty food residues have remained on the dishes for a long time. There is no grounding line in the electrical installation.
Be careful not to spill salt around the filling opening. After filling with salt, ensure the salt container lid is closed. If cutlery contaminated with salty foods is to be left in the machine, remove the dirt by pre-washing. Check that your machine is connected to a true grounding line.
Orsak: Concentrated cleaning agents like bleach have been used. Metal items, especially knives, have been used for purposes other than their intended use.
Do not wash your dishes with bleach. If you intend to use bleach, your dishwasher must have a dedicated bleach-enabled device and function. Do not use metal kitchen utensils for purposes other than their intended use.
Orsak: Cutlery is made of low-quality stainless steel. Previously rusted kitchenware has been washed in the dishwasher.
Rust is inevitable for low-quality stainless steel items and they should not be washed in dishwashers. During washing, rust from a rusty item can migrate to other stainless steel surfaces. Such items should not be washed in dishwashers.
Orsak: Patterned glasses and overglaze porcelain are not dishwasher-safe.
Glass and porcelain tableware manufacturers do not recommend washing these types of items in the dishwasher.
Orsak: Kitchen utensils and accessories made of or containing aluminum should not be washed in the dishwasher. There is a salt leak.
Do not wash aluminum kitchenware in the dishwasher. When filling with salt, be careful not to spill any salt around the filling opening. Spilled salt can cause scratches.
Orsak: The water hardness setting is low or the salt level is insufficient.
Check the water hardness setting by measuring the hardness of the mains water accurately.
Orsak: The detergent was added a long time before the wash cycle. The detergent compartment cover is not properly closed.
Be sure to add the detergent just before starting the wash cycle.
Vanliga Frågor
De vanligaste frågorna om Beko BDFN26531W.
Hjälp
Har du frågor om köksmaskin BDFN26531W från Beko? Ställ dem direkt till vår expert! Du får information, praktiska tips och skräddarsydda lösningar på bara några sekunder.
Relaterade bruksanvisningar
Nedan hittar du bruksanvisningar för köksmaskin som liknar BDFN26531W. Prova även att se alla Beko köksmaskin bruksanvisningar
Diskussion
Lämna en kommentar eller ställ en fråga
Delta i diskussionen
Ställ en fråga om bruksanvisningen eller lägg till ett användbart svar för andra användare.