Använd läsaren nedan för att läsa Atag HI1272S spis bruksanvisningen. Du kan bläddra genom bruksanvisningen direkt på sidan och använda vår läsares funktioner för att hitta all viktig information om installation, användning och underhåll av denna Atag spis.
Bruksanvisning
HelskärmFelsökning
Praktiska tips för att lösa de vanligaste problemen med Atag HI1272S.
Orsak: This is the standard set-up routine.
Normal operation. No action needed.
Orsak: The hob is cooling down.
Normal operation. No action needed.
Orsak: The new appliance is heating up.
This is normal and disappears after the hob has been used a few times. Ventilate the kitchen.
Orsak: This is caused by the capacity limiter on the front and back zones. A soft ticking sound can also occur at lower settings.
Normal operation. No action needed.
Orsak: APd function is active without a pan present.
Remove the pan or switch off the APd function.
Orsak: This is caused by the energy flowing from the hob to the saucepan.
This is normal for certain pans at a high cooking setting. This is not harmful for the pans or hob.
Orsak: The pan you are using is not suitable for induction cooking or has a diameter of less than 12 cm.
Use a suitable pan (see pages 13 and 14).
Orsak: The preset time has ended.
Switch the signal off.
Vanliga Frågor
De vanligaste frågorna om Atag HI1272S.
Hjälp
Har du frågor om spis HI1272S från Atag? Ställ dem direkt till vår expert! Du får information, praktiska tips och skräddarsydda lösningar på bara några sekunder.
Relaterade bruksanvisningar
Nedan hittar du bruksanvisningar för spis som liknar HI1272S. Prova även att se alla Atag spis bruksanvisningar
Diskussion
Lämna en kommentar eller ställ en fråga
Delta i diskussionen
Ställ en fråga om bruksanvisningen eller lägg till ett användbart svar för andra användare.