Använd läsaren nedan för att läsa Frigidaire FCRE3083AD spis bruksanvisningen. Du kan bläddra genom bruksanvisningen direkt på sidan och använda vår läsares funktioner för att hitta all viktig information om installation, användning och underhåll av denna Frigidaire spis.
Bruksanvisning
HelskärmFelkoder
Nedan hittar du felkoderna för Frigidaire FCRE3083AD.
Oven control has detected a fault or error condition
Press the OFF key on the control panel to clear the error. If the error repeats, turn off the power to appliance, wait 5 minutes, and then repower the appliance. Set the clock with correct time of day. Try the bake or broil function again.
Oven control has detected a fault or error condition
Press the OFF key on the control panel to clear the error. If the error repeats, turn off the power to appliance, wait 5 minutes, and then repower the appliance. Set the clock with correct time of day. Try the bake or broil function again.
Felsökning
Praktiska tips för att lösa de vanligaste problemen med Frigidaire FCRE3083AD.
Orsak: Appliance not connected or electrical power outage
Make sure power cord is plugged properly into outlet. Check your fuse box or breaker box to make sure the circuit is active. Check house lights to be sure and call your local electric company for service outage information.
Orsak: Many factors affect baking results including oven rack position, food placement, and preheating
Use proper oven rack position. Center food in the oven and space pans to allow air to circulate. Preheat the oven to the set temperature before placing food in the oven. Try adjusting the recipe's recommended temperature or baking time.
Orsak: Excessive spills in oven or improper broil settings
Wipe up excessive spills before starting the oven. If flames or excessive smoke are present when using broil, follow the proper broil setting instructions.
Orsak: Incorrect setting, meat too close to broil element, or grease buildup on oven surfaces
Follow the correct broil setting instructions. Reposition the broil pan to provide proper clearance between the meat and broil element. Remove excess fat from meat. Perform regular cleaning when broiling frequently.
Orsak: Regulator gas valve not turned on, clock not set, or improper oven control settings
Be sure the regulator gas valve is turned to ON. Set the clock to correct time of day. Ensure oven controls are set properly for the desired function.
Orsak: Oven door is open or fan has not yet started during preheating
Close the oven door. On gas models, the convection fan will begin to rotate about 6 minutes into the preheating process.
Orsak: Incorrect surface control setting
Adjust power level setting.
Orsak: Incorrect surface control knob setting or cookware issues
Be sure the correct surface control knob is turned on for the element needed. Use only flat, evenly balanced, medium or heavyweight cookware. Flat pans heat better than warped pans.
Orsak: Mineral deposits from water and food
Remove them using cooktop cleaning creme applied to the ceramic surface. Buff with a non-abrasive cloth or sponge.
Orsak: Coarse particles between cooktop and utensils or use of inappropriate cleaning materials
Be sure the cooktop surface and bottoms of utensils are clean before use. Apply cooktop cleaning creme to the ceramic surface. Buff with a non-abrasive cloth or sponge. Use smooth, flat-bottomed cookware.
Orsak: Sliding or scraping of metal utensils on cooktop surface
Do not slide metal utensils on the cooktop surface. Apply cooktop cleaning creme to the ceramic surface. Buff with a non-abrasive cloth or sponge.
Orsak: Boil overs are cooked onto the surface
When cooktop is cool, use a razor blade scraper to remove soil.
Orsak: Oven control not set properly
Review instructions on Setting Self Clean.
Orsak: Oven racks left in oven cavity during self clean cycle
Remove oven racks from oven cavity before starting a self-clean cycle. Clean by using a mild abrasive cleaner following manufacturer's instructions. Rinse with clean water, dry, and replace in oven.
Orsak: Self clean was interrupted or excessive spills on oven bottom
Review self clean instructions. Remove excessive spills before starting self clean. Clean the oven frame, door liner outside the oven door gasket, and the small area at the front center of the oven bottom before starting the self-cleaning cycle.
Orsak: Cooktop surface burner was turned on during self-clean cycle
Do not use the cooktop during a self-clean cycle. If the clean cycle is canceled, wait for the oven to cool down below cleaning temperature before starting another clean cycle.
Orsak: Floor is not level or poor installation
Be sure the floor is level, strong, and stable. If the floor is sagging or sloping, contact a carpenter. Place a level on the oven rack and adjust the leveling legs at the base of the appliance until the rack is level.
Orsak: Cabinets not square, appliance built in too tightly, or carpet interferes
Contact the builder or installer to make the appliance accessible. Provide sufficient space so the appliance can be lifted over carpet.
Orsak: Oven light is not secure in the socket
Be sure the oven light is secure in the socket.
Vanliga Frågor
De vanligaste frågorna om Frigidaire FCRE3083AD.
Hjälp
Har du frågor om spis FCRE3083AD från Frigidaire? Ställ dem direkt till vår expert! Du får information, praktiska tips och skräddarsydda lösningar på bara några sekunder.
Relaterade bruksanvisningar
Nedan hittar du bruksanvisningar för spis som liknar FCRE3083AD. Prova även att se alla Frigidaire spis bruksanvisningar
Diskussion
Lämna en kommentar eller ställ en fråga
Delta i diskussionen
Ställ en fråga om bruksanvisningen eller lägg till ett användbart svar för andra användare.